Pitch and roll parts to print with 0.1mm layer and 100% infill.
Frame to print with 0.1mm or 3mm layer and 20% infill.

You will need:

• 2 servos like Graupner des271 BB
• 1 CR motor from HIMAX CR2805, supplied prop will work but the flight time will be reduced, try the T-motor 9x3 carbon props for the best efficiency,
• 2 10A brushless ESC
• 12mm clevis, 2mm threaded rod and 1,6mm screw for commands
• 2 M6 wing fixation to attach the roll plate on the pitch plate (like in the pic)
• 1 rx and 1 flight controller CC3D or NAZE32 for example,
• 1 gopro or 1 FPV CAM,
• 1 video TX,
• 1 2000-2700mah 3S lipo
• 3 3mm carbon rod for the gear (optional)

That's it! enjoy!