A parametric model for Bonsai display table.

Following parameters can be adjusted with OpenSCAD :

• width: table width in mm (default 90),
• height: table height in mm (default 50),
• depth: table depth in mm (default 90),
• thickness: tabletop thickness in mm (default 2),
• footsize: square feet size in mm (default 10),
• radius: carving radius in mm (default 3),
• hole_offset: carving offset in mm (default 1).

Note: The carving depth is radius - hole_offset and is identical on the top and bottom of the table. With default values, the carving in 2mm deep.