This is a case for the most recent version of the NAC Splitfire as of April, 2023.

You will need five M2x6 bolts and nuts to attach everything. Installation is self evident, but a bit finicky because of the small bolt and nut size. I suggest placing the nuts into the holes first, and screwing a bolt through each nut before installation in order to align and friction fit them into the holes and make installation much easier.

Print Settings

Printer Brand:

Prusa

Printer:

Rafts:

No

Supports:

Resolution:

.3

Infill:

Filament: anything decent PLA doesn't matter

Category: Games