Want to make a RetroPie without the bulky arcade cabinet? Its got to be portable! And better cost less than $50.

Well here is my version of an all inclusive box for the RetroPie

Post-Printing

These are the parts I used for my build, most of them I already had. In case you need something here is a link.

• Raspberry Pi 3 Model B Motherboard

• 16GB Micro SDHC Memory Card

• 8-Inch HDMI Male to Female Port Saver

• Anker PowerLine Micro USB (3ft) - Durable Charging Cable

• Apple 5W USB Power Adapter wall Plug

• PlayStation 3 Wireless Controller

• Raspberry Pi Case Designed by 0110-M

• • Top Case - rpi2-top_netfabb.stl
• • Bottom Case - rpi3-bottom_netfabb.stl

• 4 - 4 X 1/4" Sheet Metal Screws - to attach Raspberry Pi to case bottom

• 4- 4 X 3/4" Sheet Metal Screws - to attach the case top to the case bottom

• 4 - M4X10 Screws - to mount Raspberry Pi case to RetroPie Box The filament I used

• Silver HATCHBOX-1KG1.75-SLV PLA 3D Printer Filament, 1 kg Spool, 1.75 mm

• Blue HATCHBOX-1KG1.75-BLU PLA 3D Printer Filament, 1 kg Spool, 1.75 mm

• Natural Clear 3D Solutech 1.75 mm PLA Filament 2.2 LBS (1.0KG) The raised letters on the front panel were just colored in with a Sharpie. I'm sure a little paint would look much nicer if you see fit.

Need some help Getting your RetroPie up and running

https://retropie.org.uk/docs/First-Installation/

Category: Games