Tigers Teeth from Kilmongers Necklace!!

My buddy wants to cosplay as Killmonger for an upcoming con and he wanted me to help with making the necklace.

I figured the easiest thing for me to do was to 3D print the teeth and make the necklace band out of foam. The problem was i couldn't find a tooth shape I was happy with on thing verse.

I came across "noahsmith" rhino horn design and i really liked the shape. I removed the base plate, made it taller and skinnier, then finally added the gold stud to the bottom.

I printed 7 teeth for my necklace, i kept them all at %100 scale.

I noticed there were a couple imperfections that printed in each one. I'm not sure if it was an issue with my printer or the file itself. I'm planning on spraying it with filler primer and sanding it smooth anyway so it doesn't really matter.

I'll post photos of the finished necklace once i get around to completing it.

Print Settings

Printer:

FLSUN QQS

Rafts:

Supports:

Infill:

Filament: Hatchbox PLAPost-Printing =============

Category: Props