Impress your pets with this fantastic scooper! 
I designed this so i could easily scoop bulk pet food from the container and supply the pets with their food. 
I printed this in some red Kingroon PETG on a Bambu X1C.
It printed great for me. I used a 0.6mm nozzle, 0.36mm layer height with painted seams, and 12% gyroid infill. Thicker layer height (i.e more than 0.30mm) will increase overall strength, and result in a stronger print.

The walls are pretty thin, so it prints fast and is slightly flexible, just don't stomp on it because it will probably break! 

It took me ~1hr 15min to print.

There is two small (2.5mm) drain holes positioned at the bottom of the scooper which are intended to drain water when you need to clean it, however this means it will not really be suitable for fine-grained food, but i believe most pet food are probably larger nuggets..

Make no mistake, this is probably the best pet food scooper you will ever find.

Feel free to modify the file to suit your needs.