This is a multiple sensors station:
Temperature
Light
Moisture
Pressure

ESP8266 inside

Attention
Need to make a PCB for this project and need to solder really thin wires on 3 GPIOs (4, 5 and 16)
We recommend to make the new MultiSens version (Wemos D1 Mini Inside), it's more easy: https://www.thingiverse.com/thing:4585358

Creality

CR10S PRO

No

Yes

0.30

15%

Need to apply 4 walls to get a perfect finish

-1x ESP8266 (01 or 01S)
-1x Micro USB Breakout
-1x 5mm LED
-1x HT7333 (LDO 3.3v Regulator TO92 Version)
-1x Capacitor (16v 22uF it's for the LDO regulator but i'm sure it's not the best value)
-1x BH1750 (Light sensor)
-1x BME280 (Temperature, Pressure and Moisture sensor)
-1x Resistor (180Ohm)
-1x PCB (31x41mm)
-1x Female PCB Dupont Pin (2 Holes for SCL and SDA pin)
-1x Female PCB Dupont Pin (1 Holes for the deepsleep pin)
-2x Female PCB Dupont Pin (4 Holes for the ESP)