Disclaimer:

⚠️This has not been printed yet. This is designed for everything to fit but hasn't been tested.⚠️

Overview:

This is a small cart that was designed for Hatchbox spools but can also work with other spools that have a diameter of 8 inches and an inner diameter of 2 inches. This does slide under the IKEA Lack enclosure even if you use the smooth top. The different tops are if you have more or less space. The assembly is pretty self explanatory. 

Pieces to print:

4x Stand

4x Height add

4x Cap/Cap Smooth Top

4x Holder

However, you may print more Height Add's if you would like it to hold more spools. This will also make it taller. You also have the option of having a normal cap or a cap with a smooth top. The cap with a smooth top adds just a tiny bit more to the height but will look nicer. The normal cap should be used if you are really tight on space. The holders slide over the Stands to help keep them in place.

Non-printed parts:

One thing you will need is four 0.75 inch steel balls. Here is a link for 5 of them: https://www.amazon.com/uxcell-4-inch-Bearing-Stainless-Precision/dp/B07YFX16LC/ref=sr_1_5?crid=14GGYO55DO86T&keywords=.75+inch+steel+ball&qid=1666720696&qu=eyJxc2MiOiIwLjAwIiwicXNhIjoiMC4wMCIsInFzcCI6IjAuMDAifQ%3D%3D&sprefix=75+inch+steel+ball%2Caps%2C199&sr=8-5 

Last note:

Again, this has not been tested so print this knowing that this may not work as you expected. However, if you do print this please leave a make and say how well it works and where it needs improvements. Please reach out to me using the built in messenger app if you have any questions or ideas.