Description

I happened to need a drink holder for my desk at home and wanted to clear some space off of my desk, so I came up with the design. A few friends liked it and wanted the file, so I decided to post it for others.

It will hold the following: 

• GFUEL Shaker,
• Yeti Mugs for, the most part( only tested with the rambler and one similar)
• any 85mm wide coffee mug 

Printing Settings

• 3 walls, 15% infill
• brim

Bill of Materials: 

• ¼ -20 x ¾ Countersunk screws ( x2) **The length does not matter; this is what worked for my desk due to the thickness of the material.

URL: https://www.homedepot.ca/product/paulin-1-4-inch-20-x-3-4-inch-18-8-stainless-steel-flat-head-phillips-machine-screw/1000423584

• ¼ -20 x __ mm Flanged inserts ( x2 ) ,***( only required if your adding onto a desk that has nothing yet to mount to. 

URL:  https://www.homedepot.ca/product/paulin-1-4-20-x-20-mm-flanged-insert-nut-zinc-plated/1000166379

Assembly:

• Print the hole layout piece
• mark out the holes and drill with a 5/16 bit to the depth of the insert you want to use 
• Print the Holder standing up; I used tree supports, as shown in one of the last picture. 
• screw in the insert and then screw the drink holder on and enjoy :).