This is SMARS remix designed to take the Smartibot controller and motor system whilst retaining the SMARS track system.

It is still very much a work in progress as:

1. the drive wheels need possibly a wee bit less taken out of the hub to reduce the required screw length to connect wheel to motor shaft.

1. Mounting bracket / screw holes need to be added to the front of this so that Smartibot controller board can be properly secured. Currently it is just held in place.

1. A better mounting for the battery needs to be worked out. For this you will need :

   1 x Smartibot kit - for the Smaritbot controller and motors.

   1 x chasis
   2 x drive wheels
   2 x idler Wheels
   32 x track segments

   You can grab the Smartibot from here:

   https://thecraftyrobot.net/collections/smartibot

   Print Settings

Printer:

GEEETECH A10

Rafts:

Supports:

Doesn't Matter

Resolution:

Infill:

20

Filament: 3D Printz PLA Variable

Category: Robotics