Alcohol problem

print Settings:
nozzle diameter: 0.80mm
layer height: 0.500mm
infill: 25%
support: NO
walls: thickness or at least 1.0mm
top and bottom layers: 3 to 4
material: PLA

Parts Needed:
Nuts and bolts: https://tinyurl.com/5bz4xaz6
Alen Keys: https://tinyurl.com/ujer8hc9

Special Instructions:
Drill out holes with 4mm drill and use 30mm M4 bolts with nuts and washers

please feel free to leave comments and feedback
please checkout my other designs:
https://www.thingiverse.com/carter\_383/designs

please also consider donating a small amount to help allow me to turn this into a carer or please just leave me a comment with any advice on hoe yo improve my designs or ideas or new ones
https://paypal.me/3DCarter383?locale.x=en\_GB

Links:
printer: https://tinyurl.com/whd9ruaj
filament: https://tinyurl.com/pr7d5cs6

Print Settings

Printer Brand:

Creality

Printer:

Rafts:

No

Supports:

Resolution:

200

Infill:

Filament:
PolyMaker PETG

Category: Household