A parametric, adjustable stand for laptops, books/notebooks, or other rectangular objects. You can add or remove dividers based on the thickness of your objects and adjust the spacing between them 

2 slot or 3 slot version:

• 2 slot offers decreased hardware but slightly less rigidity. 
• 3 slot offers more rigidity and a slightly more right-angle connection to the base but costs more hardware.

Hardware (per divider):

• 2 (or 3) M4 * 14mm bolts
• 2 (or 3) M4 nut
• 2 (or 3) M4 washer 

Print Settings:

• “Fast” setting with 15% cubic infill and wall lines increased to 4.
• 3 dividers and a base takes around 3 hours on a K1 Max with regular PLA.
• Print the base upside down
• Print the divider nut holes up with (optional) support for screw hole
• The slots for the nuts fit very tight (by design). You can adjust them in the .scad or widen them with and exacto if they are too tight.