Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 113.68x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Matte Dark Brown Transmission Distance: 2
PLA BambuLab Basic Beige Transmission Distance: 8
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA PolyTerra Sunrise Orange Transmission Distance: 2
This print uses 6 unique filaments

Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Blue Gray
At layer #8 (0.72mm) swap to Dark Brown
At layer #9 (0.8mm) swap to Beige
At layer #10 (0.88mm) swap to Jade White
At layer #14 (1.2mm) swap to Black
At layer #20 (1.68mm) swap to Sunrise Orange