Conscendo Wheel
bumblesoil
Find Similar with AI
Print Profile(0)
Model File(0)
0
0
0
Published:2025-12-06 15:17:00
0
0
000Description
Tags
Model Source
Reviews(0)
Landing wheel for Conscendo Evolution. Plane has a plastic skid, landing on a hard surface wears it out pretty fast, so I designed this replacement. It takes the place of the stock skid.
I am pretty sure that the same skid is used on the Conscendo Advanced also. I intend to print one and try it on the Advanced.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
.16 or .2
Infill:
20
Filament: Overture PLA and TPU White
Notes:
I included a screen grab of my support setting for the skid. It is printed at .16 layer height. The settings listed work pretty well on my Ender 3 pro, print the skid oriented so that the 4 pegs are on the build plate. Print with a Brim.
The two wheel pieces are joined with a 3mm x 6 screw. It should self tap into the other half of the wheel. The wheel can be printed at .2 mm layer height.A 3mm x 30mm bolt is used for the axle, using a jam nut.
The TPU wheel was printed on my Creality CR-6 w/Direct Drive.
Tags
Model Source
Original Link: View details
CC-BY