Adventurer 3

Yes

15

ABS so I've been warned, is tricky. After testing and setting finding, I found!
As an extension of the default settings, adjustments are below:

250c extruder temp - 100c bed temp

retract length 5.8mm

Slowed first 3 layers max 30mm/s

Decreased both the interior and ext. visible speed by 10%

4 shells - 5 top 4 bottom solid layers

raft = default

used shrinkage setting at 3% both x/y and 5% in z

also like to used the setting of z height adjust at .2mm

let me know how you do, and what you get!