Print in PETG or ABS. This model will not last very long in PLA. 

Model has rounded edges to eliminate line fraying

Grommets to add strength

ball bearing swivels for best performance

----------------------------------------------------------------------------------------------------------------

Settings: 

wall line count: 5-7

speed: 25mm/s

support on, tree

Use brim

*Note: These settings can vary based on how good or bad your bed adhesion is. The best orientation for this model is vertical for the best performance, but this is harder if you have bad bed adhesion. I recommend changing a few settings to fit your printers bed adhesion. 

----------------------------------------------------------------------------------------------------------------

Parts: 

You can either buy or create your own sticker using something such as a cricut. 

Link for sticker: https://sportco.com/yakima-bait-pre-cut-fish-flash-tape-4-pack/?sku=YAK-4811PL&srsltid=AfmBOoqNrmp-18VwZj5h2ErWnh-Y1exGIIdmG2JtjyJo-2Fa2uxhFBQXmcA and https://fishermans-marine.com/products/yakima-bait-big-als-fish-flash-flasher-tape?variant=47114110271802 

Link for grommet: https://www.amazon.com/C-S-Osborne-Nickel-Grommets-Washers/dp/B07CV6HJTB/ref=sr_1_2?dib=eyJ2IjoiMSJ9.HvuLSEdUUt_kRnqVGJJeRv4A_48tiNZny7Uqi7vKj2neZSUIBnBKCsncERBMWaauSrK89eJVD4sUhxKgfqPNHv1Rak5VwV60bLVWDvC8Bvs2g2FnkX4JTk95s8GC1qQ5MpkUwuaAtUb2LHbIxwYWA14MiKqhoH4iscDlqE-yNW28_1v-TMx_tFd33MS54PCzERa305RoEhTPUEFM-ULrod1sQS0dTykdSGlv4rWZ3A8.i1IDQdyGvUylWrQAdM2lGvdhv7Cp6ybrRgVNSm14o1I&dib_tag=se&keywords=00+grommets&qid=1733371864&sr=8-2

There are multiple different tools to choose from to use the grommets, some look like a pair of plairs and some are presses. 

Here are the ball bearing swivels: https://www.amazon.com/AMYSPORTS-Connector-Stainless-Saltwater-Freshwater/dp/B08ZHDJSNM/ref=asc_df_B08ZHDJSNM?mcid=dffe94c6a7d334aabe4500716096939f&tag=hyprod-20&linkCode=df0&hvadid=693308324848&hvpos=&hvnetw=g&hvrand=18351877137211372195&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9033507&hvtargid=pla-1955285296313&th=1&psc=1

Reflective Eye 14mm diameter (not required for model): https://www.amazon.com/90pcs-Silver-Holographic-Fishing-Crafts/dp/B091DJRWKC