Having an overheat on the K1 camera (than I didn't know how and where) from Creality, it provocates connection lost.

So... I got tired from Creality Support that keeps telling me that it's a “firmware” issue when it's false.

I designed this support to use it with a Yihome camera than you can find in Amazon or Aliexpress. This camera is cheap. You only need to remove it from it original support.

Also you need 1 M4x10 mm with a washer and a nut to hold the camera on the support and also one M2x20 mm with a washer and a nut (or 2x M2,5x 8 mm) to hold the support to the left side of the metal rod as you see in the image but, if you don't want to use the garbage of the K1 camera, you can flip to the right side on the slicer (or the simetrical) and use the original screw from the K1 camera.

The X gantry doesn't hit the camera so you see on the images that you have full color (and grey/white color at night) to keep an eye meanwhile printing.

Also you can buy one Yihome camera that has IA inside and also microSD slot… so you can use those images to have time-lapses.

I don't know how to take this camera inside Klipper so… you would not need a microSD. Ask another guy.

I use this support to design the rest: https://www.thingiverse.com/thing:4960462/files

WARNING: Do on PETG/ABS due that it gets hot.

Donations through Paypal