A platform to get bottles and cans up off the bottom of your shower niche so they can dry to help prevent rust and/or mold.

Update: Added v2. New configuration setting for the number of weep holes (fewer holes should speed up printing a bit), has the weep holes go through the side now, and also fixes a few centering problems with various things (e.g., top slats and middle support). Renamed old SCAD file, so rename it as appropriate when you download it. This new one seems to work in OK Customizer, but you can probably come up with some unusable configurations if you try.

Edit: The v2 STL is 190mmx80mmx6mm with 8 weep holes.

Included STL is 200mmx80mmx6mm. I resized it in my slicing software until it and the skirt would fit my print bed, so the one displayed in the picture is 190mm x 80mm x 6mm.

It was printed in white ABS with a 0.6mm nozzle, 1.2mm top/bottom and walls (shells). Infill was set to 50%, but I'm not sure there was any open areas for it to kick in.

I tried to make sure the SCAD file would be configurable for most uses.