This is a wall-mount for the Oculus Rift Sensor. It's designed so that the sensor rod will friction-fit into the main hole of the mount. Since printers vary, you may need to up/downscale your model to fit. The sensor cable fits within a recess in the rear of the mount.
I used 3M Command medium strips to adhere the mounts to the wall. To conserve my strips, I cut them in half widthwise, then put some normal clear tape on the end of the tab-less half to act as a replacement tab.

FlashForge

Creator Pro

Doesn't Matter

No

.2 mm

15%

The .thing file is provided in addition to the .stl as reference for print orientation. But I guess you can just bypass the .stl altogether! Haha.