This project creates a fully functional RC hovercraft that glides over various surfaces, powered by electric motors and controlled via a standard RC transmitter.
You can find the assembly guide in files.

more at my Github.

• 1 main_body: print with "Allow thin walls"
• 1 propeller_duct
• 1 rudder
• 1 outer_skirt_clamp
• 1 skid_plate 

• 1 1407 bldc motor: around 3500kv
• 1 3 inch propeller: if ccw mirror the rudder
• 1 30a 3s ESC: with xt60 connector (20a might work too)
• 1 9g servo motor: with screws and arms
• 1 1000-1100 mah 3s lipo
• 1 PWM receiver
• 1 trash bag: thick or double layer
• 28-66 M3 8mm bolts: recommended 28
• optionally 3 male & 3 female 3mm bullet connectors