I was looking for a holder for the lids of my cooking pots. Since all the holders were usually just for attaching a bar to hold the pots, I decided to make my own fully 3D printed ones. 
These are for Fissler pot lids (they are about 2 cm thick). if yours happen to be about the same size it should fit for other brands as well. there is one for 18 cm diameter and one for 22 cm diameter pot lids. 

The side where the opening is slightly larger should point upwards after attaching them. I used two 3.5 mm wood screws for each holder.

I printed them in prusament pearl white PLA. I used the 0.8 mm nozzle, with the regular 0.4 mm nozzle it should only take a little longer and might require more perimeters to be sufficiently stable.