This is a chain delete mod for the Creality K1 max. 

The chain was always touching and rubbing the gantry or the linear rod, and sometimes even with a chain riser I had issues with the chain touching or slapping the side of the case

It's intended to be used with superb riser from Sprintech : https://www.printables.com/model/946280-k1-k1c-k1-max-riser-v2 as the back arm support replace one of the clip that attach the riser to the frame

It was made with the intent to still be able to close the top lid without having to make a gigantig riser. It could be used with any other riser if you design just the arm support

The back_arm_support.stl just need 1x M4x20 screw and the front_cable_guide.stl needs 1x M3x8 screw.

You should be able to use the original toolhead cover but the cuts of the front top mount on the sides are there if you have the Skeletor mod or if you don't use the little knobs where th OG toolhead cover sits

Edit 12.09.2025 : 
I've added a longer arm as the short one still dragged for me but be careful to test by hand so the cable aren't pinched somewhere during printing.
I also added a version of the front top mount on the toolhead that screw in from the front if the crew from the top insert of the chain broke in the insert. (careful, it didn't test this one, I've made it after someone's request)