A weekclock that uses a standard clock mechanism and a planeateary gear system.

Please let me know if you wish to have the days in another language.

Materials needed:

1 x Standard clock mechanism that is 56x56x17mm

3 x 608 ball bearings

4 x m2x10 self tapping screws

Printing instructions:

I used 4 perimeters, 4 bottom and top layers, and layer height 0,2 mm.

If you have problems with getting the teeths of the gears to stick to the bed, then I can recomend using the setting Extrenal perimeters first.

To print the days in another color you can either do a color swap before the last layer or flip it over and split it up in to seperate prints.