I was tired of the scattered toothbrush heads on our bathroom sink and decided to design something to fix it. There are many other options already on Thingiverse, one of them I'm going to print out to see if it's better, but I wanted to learn more about sketches in Fusion 360 and this was as good an excuse as any.

I also printed an insert that can be used for the toothbrush holder holes. The holes can hold the brushes as is, and it works fine. But if you want them to sit on pegs and be a little less wobbly, the insert should work for that. I made them a separate component since printing them in the orientation that makes the entire stand strong will make the pegs flimsy and likely to snap.

You'll notice 2 versions, sonicare.stl and sonicare-short.stl. We have a little dropper bottle to hold our tooth drops, so I designed that into the stand. The sonicare-short.stl file omits this feature since most people won't need it, so that is most likely the file you will want to use. I also uploaded an f3d file for people who wish to customize the design.

Update 10/2025: Someone asked for a 2-hole version, so I added that as an option as well (Sonicare-2hole.stl).

Monoprice Maker Select v2

No

No

0.2mm

20%

These settings are for the stand. 20% infill, no supports required.

The insert, however, requires different settings to print well. The insert should be printed on its side so that part is strong in the Z-direction when installed in the base (meaning it won't snap off at the base of the peg). I printed with supports, using 30% infill density, 15 degree support overhang angle, and 50% infill.