Summary

I made a few tweaks to the base design:

Motors: I used different motors – mine are smaller, which makes them easier to mount. I designed mounting plates that slide into position using slots integrated into the base.

Flipper Mounting: I redesigned the flipper mount. My version uses a bolt placed in a ball bearing to support the flipper, allowing it to move very smoothly. The flipper is now supported at two points for increased stability.

Wheel Mounting: I wasn’t able to find the same wheel mounts as in the original design, so I added ball bearings inside the wheels and mounted them using long screws that go between the armor and the base.

Armor Piece: I redesigned the armor to make it easier to print – it now has a flat surface. It’s also slightly narrower, which reduces the gap between the wheels and the armor. Additionally, I added another channel so that the long screw used for mounting the forks can now be secured with a nut.

Top Plate: I designed a new top plate that is thicker and made from a squishy material. This helps absorb impacts and works perfectly against hammer-saw-style bots.

Materials you need to use,
M3 Bolts 15mm for Flipper mount,35mm for wheel and amor mounting and 45mm for forks mounting
M2 Bolts 4mm for motor mounting
Ballbearings 3x7x4