Please use the Customizer or download the SCAD file and make modifications to suit your own dice! I have provided two STLs as examples but chances are you'll want something different.

This box is designed to be a fast way to count your dice in-game so that you can focus on your game plan rather than frantically counting up dozens of dice. This is particularly suited to people who find themselves rolling 20+ dice on the regular which is commonly seen in Warhammer 40K when playing horde armies such as Orks.

The counter also serves as a great box to roll the dice from, as it also allows you to easily direct where you are rolling the dozens of dice. This makes it easier to get them all to stay in your dice tray.

I'm also considering making a lid for the box so that it can also be used to transport your dice. Possible update to come.

A 'Side Fudge Ratio' of 0.25 is about right for most dice. You can do a test print at a smaller size to see what works for you but I've found most dice are happy with this value. Setting it lower is likely to make the counter harder to load and not as pleasant to use.

A 'Wall Width' of at least 3mm is required for anything more than 40 dice otherwise the box will become flimsy/fragile with PLA. Only lower this value for smaller boxes and test prints.

Enjoy!

Prusa

I3 MK3S

Yes

No

.20

15%

I didn't use rafts when printing on the Prusa, but you may get warping in the corners if you don't.