This is a simple model assumed to be made by elastomer filament FABRIAL,
which can hold water inside under certain printing settings.
Have fun with the unique touch!

No

No

No

Preferred setting is Mutoh MF-1000 with Slic3r as a slicer and Pronterface as a driver.
Setting of the Slic3r is:

Print Settings
Layers and perimeters
Vertical shells
Layer height 0.3mm
First layer height 0.3mm
Perimeters 1
Spiral vase yes
Horizontal shells
Solid layers(Top/Bottom) 0/3
Quality
Extra perimeters if needed yes
Avoid crossing perimeters no
Detect thin walls yes
Detect bridging perimeters yes
Advanced
Seam position Nearest
External perimeters first no

Infill
Infill
Fill density 0%
Fill pattern Honeycomb
Top/bottom fill patern Concentric
Reducing printing time
Combine infill every 10 layers
Only infill when needed yes
Advanced
Solid infill every 0 layers
Fill angle 45°
Solid infill threshold area 0mm^2
Only retract when crossing perimeters no
Infill before perimeters no

Skirt and brim
Skirt
Loops(minimum) 2
Distance from object 3mm
Skirt height 1 layers
Minimum extrusion length 0mm
Brim
Brim width 0mm

Support material
Support material
Generate support material no
Overhang threshold 45
Enforce support for the first 5 layers
Raft
Raft layers 0
Options for support material and raft
Contact Z distance 0.2
Pattern rectliniar grid
Pattern spacing 1.5mm
Pattern angle 0°
Interface layers 0 layers
Interface pattern spacing 0mm
Don't support bridges yes

Speed
Speed for print moves
Perimeters 5mm/s
Small perimeters 1mm/s
External perimeters 5mm/s
Infill 5mm/s
Solid infill 5mm/s
Top solid infill 2mm/s
Support material 5mm/s
Support material interface 100%
Bridges 5mm/s
Gap fill 5mm/s
Speed for non-print moves
Travel 5mm/s
Modifiers
First layer speed 5mm/s
Acceleration control(advanced)
Perimeters 0mm/s
Infill 0mm/s
Bridge 0mm/s
First layer 0mm/s
Default 0mm/s
Autospeed(advanced)
Max print speed 5mm/s
Max volumetric speed 0mm^3/s

Multiple extruders
Extruders
Perimeter extruder 1
Infill extruder 1
Solid infill extruder 1
Support material/raft/skirt extruder 1
Support material/raft interface extruder 1
Ooze prevention
Enable no
Temperature -5Δ℃
Advanced
Interface shells no

Advanced
Extrusion width
Default extrusion width 0.8mm
First layer 0.6mm
Perimeters 0.8mm
External perimeters 0.8mm
Infill 0.6mm
Solid infill 0.6mm
Top solid infill 0.7mm
Support material 0.5mm
Overlap
Infill/perimeters overlap 15%
Flow
Bridge flow ratio 1
Other
XY Size Compensation 0mm
Threads 2
Resolution 0mm

Output options
Sequential printing
Complete individual objects no
Extruder clearance(mm:Radius/Height) 20mm/20mm
Output file
Verbose G-code no
Output filename format .gcode
Post-processing scripts

Notes
Notes

Filament Settings

Filament
Filament
Color white
Diameter 3mm
Extrusion multiplier 1
Temperature(℃)
Extruder(First layer/Other layers) 140/140
Bed(First layer/Other layers) 25/25

Cooling
Enable
Keep fan always on yes
Enable auto cooling yes
Fan settings
Fan speed(min/max) 100%/100%
Bridges fan speed 100%
Disable fan for the first 0 layers
Cooling thresholds
Enable fan layer print time is below 60 approx. sec
Slow down if layer pirnt time is below 10 approx. sec
Min print speed 1mm/s