This Bracket is for mounting the Battery Disconnect Holder (https://www.thingiverse.com/thing:5180683) to the front chassis mount on my Jeep JK Wrangler. I used a #10-24 x 1/2" long Flat Head Screw, and blue thread locker, to fasten the bracket to the stock mounting bracket on the chassis near the front bumper. The Battery Disconnect Holder is mounted to this bracket using four #8-32 x 5/8" long Button Head Socket Cap Screws and four #8-32 NyLok nuts. (Other suitable machine screw hardware will work too.)

The wiring is 8 AWG from a set of Jumper Cables.

I filed two notches in the Battery Disconnect Holder to accommodate the lanyard of the cover for the battery terminals.

Robo 3D

R1 ABS + PLA Model

No

Doesn't Matter

Medium

20%

After printing, drill out the mounting hole with a #25 Drill (0.149 - 0.150) and tap the hole for a #10-24 screw. I recommend using a small amount of oil to aid in tapping the threads in the plastic.