imagen de un dragon escupiendo fuego sobre la montaña, he usado hueforge pop color para poder imprimirlo en 3d

rint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Jade White Transmission Distance: 6
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Yellow Transmission Distance: 6

Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Jade White
At layer #15 (1.28mm) swap to Black
At layer #18 (1.52mm) swap to Red
At layer #21 (1.76mm) swap to Yellow for the rest.