The Hamster Hideaway
GlowingRing
Find Similar with AI
Print Profile(0)
Model File(0)
0
0
0
Published:2026-07-14 09:21:28
0
0
000Description
Tags
Model Source
Reviews(0)
This is a simple, small pet house designed for 3D printing. It features a rectangular base with four vertical walls and a pitched roof composed of two flat, angled planes. A circular opening is located on the front wall, serving as an entrance. The model is designed with ease of printing in mind, featuring flat surfaces and minimal overhangs.
Key Features:
Simple Geometric Design: Easy to slice and print.
Circular Entrance: A straightforward opening for small pets.
Pitched Roof: Helps to prevent water accumulation.
Separate Roof and Body: Depending on the desired scale and printer bed size, the roof and body can be printed separately and then joined, or printed as a single piece for smaller versions. Consider adding interlocking tabs or pegs for secure assembly if printing in multiple parts.
Wall Thickness: The wall thickness should be a multiple of your nozzle size for optimal print quality and strength (e.g., 1.2mm for a 0.4mm nozzle, using 3 perimeters). Adjust for desired sturdiness.
Infill: Use a low to medium infill percentage (15-25%) for a balance of strength and print time. Increase infill for more durability if needed.
Layer Height: A standard layer height of 0.2mm is recommended for a good balance of detail and print speed. Finer layer heights can be used for smoother surfaces.
Supports: Minimal to no supports should be required if the roof overhang angle is kept reasonable (e.g., 45 degrees or less). If supports are necessary for the roof, ensure they are easy to remove without damaging the print.
Orientation: The recommended printing orientation is with the base flat on the print bed for maximum stability during printing and to avoid the need for supports on the main body. The roof can also be printed flat.
Material Recommendations:
PLA: A good general-purpose material that is easy to print and comes in various colors. Suitable for indoor use.
PETG: More durable and weather-resistant than PLA, making it a better choice for potential outdoor use (though prolonged exposure to harsh elements is not recommended).
ASA/ABS: More durable and UV-resistant options suitable for outdoor use, but they require an enclosure for best printing results due to potential warping and fumes.
Scaling: Adjust the overall dimensions in your slicing software to suit the size of your pet. Ensure the entrance hole is appropriately sized for comfortable entry and exit.
Key Features:
Simple Geometric Design: Easy to slice and print.
Circular Entrance: A straightforward opening for small pets.
Pitched Roof: Helps to prevent water accumulation.
Separate Roof and Body: Depending on the desired scale and printer bed size, the roof and body can be printed separately and then joined, or printed as a single piece for smaller versions. Consider adding interlocking tabs or pegs for secure assembly if printing in multiple parts.
Wall Thickness: The wall thickness should be a multiple of your nozzle size for optimal print quality and strength (e.g., 1.2mm for a 0.4mm nozzle, using 3 perimeters). Adjust for desired sturdiness.
Infill: Use a low to medium infill percentage (15-25%) for a balance of strength and print time. Increase infill for more durability if needed.
Layer Height: A standard layer height of 0.2mm is recommended for a good balance of detail and print speed. Finer layer heights can be used for smoother surfaces.
Supports: Minimal to no supports should be required if the roof overhang angle is kept reasonable (e.g., 45 degrees or less). If supports are necessary for the roof, ensure they are easy to remove without damaging the print.
Orientation: The recommended printing orientation is with the base flat on the print bed for maximum stability during printing and to avoid the need for supports on the main body. The roof can also be printed flat.
Material Recommendations:
PLA: A good general-purpose material that is easy to print and comes in various colors. Suitable for indoor use.
PETG: More durable and weather-resistant than PLA, making it a better choice for potential outdoor use (though prolonged exposure to harsh elements is not recommended).
ASA/ABS: More durable and UV-resistant options suitable for outdoor use, but they require an enclosure for best printing results due to potential warping and fumes.
Scaling: Adjust the overall dimensions in your slicing software to suit the size of your pet. Ensure the entrance hole is appropriately sized for comfortable entry and exit.
Tags
Model Source
Original Link: View details
CC BY