A tiny but useful scoop. Originally designed to transfer small quantities of desiccant, the scoop has numerous applications beyond being adorably small.

 

✅ Quick to print

✅ Durable

✅ Scalable

🟩 Optional supports*

 

Easy print settings:

-Print time**                   ~30min 51s

-Wall loops                     2-4

-Infill                               15%

-Support                         Optional

-Brim                               None

 

**Times estimated for high speed printers such as: K1, K1max, X1C, p1s etc.

For additional settings see below:

 

Dimensions:

Length - 93.3mm

Width - 52.11mm

Height - 35mm

 

Additional settings:

-Bottom shell layers              5

-Filament usage                    16.25g

-Layer height                         0.2mm

-Detect thin wall                    No

-Filament(s) used in demo     sunlu pla+ (black)

 

Maker's comments:

Functions well for scooping desiccant into containers. Can also be used as a small shovel, recommended minimum 4 layer thickness if used for with wet or damp applications.

*Some small imperfections may be seen on the underside of the handle due to the shallow angle. This can be solved by either 1) adding support or 2) printing vertically on the end of the handle. (Make sure to add a brim!)

 

Use for food applications at your own risk. If you do please ensure you:

-smooth out the print after printing using heat or a protective resin to prevent bacteria from entering gaps in the layers.

-print with 4+ layer thickness

-use a stainless steel printer nozzle

-print using PETG or other food safe filament (PLA can also be used but is not recommended)

 

 

Any questions/suggestions? Please comment down below and I'll be happy to help in any way I can.