Project:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 112.6x200mm in size

You may print at higher layer heights below the Min Depth of 0.48mm

The Max Depth is 2.3mm and the Actual Depth is 2.2mm

Filaments Used:

PLA Paramount 3D Black Transmission Distance: 4

PLA PolyLite Purple Transmission Distance: 0.5

PLA PolyLite Pro Pink Transmission Distance: 3

PLA BambuLab Basic Jade White Transmission Distance: 5

This print uses 4 unique filaments

Swap Instructions:

Start with Black

At layer #9 (0.8mm) swap to Purple

At layer #12 (1.04mm) swap to Pink

At layer #17 (1.44mm) swap to Jade White for the rest.