Kodak nut size 11 mm height 6 mm

fits with tripods, printed with 0.35 nozzle

, created with Mike Thompson scad library 1/12/2013, Thingiverse: mike_linus

parameters :

//Type: Normal or WingNut
nut_type = "normal";//[normal,wingnut]
//Distance between flats for the hex nut
nut_diameter = 11;
//Height of the nut
nut_height = 6;
//Outer diameter of the bolt thread to match (usually set about 1mm larger than bolt diameter to allow easy fit - adjust to personal preferences)
nut_thread_outer_diameter = 6.7;
//Thread step
nut_thread_step = 1.27;
//Step shape degrees
nut_step_shape_degrees = 45;
//Resolution (lower values for higher resolution, but may slow rendering)
nut_resolution = 0.3;