Stationery holder for use at a table, for pens, pencils, rubbers and has space for around 25 paper clips at the front.

I printed it with white Soleyin PLA and designed it to be able to hold its contents without falling over.

the print shown was made with a 0.4mm nozzle at 220 degrees nozzle temperature, 120mm/s speed and 60 degrees bed temperature with 40% infill.

I'd recommend going with a lower layer height if you want a finer finish. 

printer took just under 2 hours to print at current settings, but slicer estimated 2 ½ hours. Final print shown weighs 31g.

hopefully its useful to someone.

If you do use it, thank you.