Project: primavera.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 1.4mm and the Actual Depth is 1.4mm

Filaments Used:
    PLA BambuLab Matte Sakura Pink Transmission Distance: 3
    PLA BambuLab Matte Ice Blue Transmission Distance: 3.5
    PLA BambuLab Matte Charcoal Transmission Distance: 0.6
    PLA BambuLab Matte Ivory White Transmission Distance: 3.5
This print uses 4 unique filaments

Swap Instructions:
    Start with Sakura Pink
    At layer #8 (0.72mm) swap to Ice Blue
    At layer #10 (0.88mm) swap to Charcoal
WARNING: This Slider is at the same Layer as the Next Slider
    At layer #11 (0.96mm) swap to Ivory White for the rest.