Magnificent illustrations drawn by Epiccarry using just two colors.

Project: silvanasbeige.hfp
Print with 100% infill, a layer height of 0.08 mm, and a first layer height of 0.16 mm

The model dimensions are 133.28x200mm.
You can print with a higher layer height below a minimum depth of 0.48 mm.
The maximum depth is 2.6mm, and the actual depth is 2.7mm.

Wire used:
PLA Overture Chocolate Color Transmission Distance: 0.2
PLA BambuLab Basic Beige Transmission Distance: 8
This print uses 2 unique types of filament.

Replacement instructions:
Start with chocolate brown.
Change it to beige on layer 13 (1.12mm) to complete the rest.