M10 Hex Nut Setter / Driver Bit

A quick-printing, functional M10 nut setter for light DIY tasks.

Key Features & Usage:

• Tight Fit: Designed for a very snug, precise grip on standard M10 bolts to prevent slipping.
• Usage Warning: Always use your power drill on the lowest speed (RPM) and minimum torque settings to avoid snapping the bit or stripping the socket.
• Material Limits: If printed in standard PLA, the socket will wear out after driving about 100 bolts. For better durability, using engineering filaments (PETG, ABS) is highly recommended.

Print Settings:

• Infill: 100%
• Walls: 4–6 perimeters
• Supports: inside