Want to make some more space in your kitchen cabinets, but still want all your cups/mugs easily accessible at once?

Enter the mug shelf! 3D-modeled this in Thingiverse and printed it to fit in my kitchen cabinets to house my two sets of matching mugs. Roughly fits 3 mugs on top and 3 underneath - the top has thickened areas underneath to help to keep the shelf from bending between the spaces mugs would sit on.

Printed on a Malyan MA-10 (Creality CR-10 clone) out of PLA with a build plate temp of 55C and a nozzle temp of 205C. Resolution was 0.15mm. Infill was set to 15 with the Octet infill pattern, sliced in Cura.

You can up the Infill if you want it to be a little sturdier. For me, it was fine at 15 as I wanted to save on filament and it was 3D-modeled to EXACTLY fit my cabinets so the legs get extra support by being right against the walls of the cabinet. You could easily adjust it to whatever size you want and it, of course, would hold plenty of other things aside from just mugs.

Dimensions - 28.75cm long X 8cm wide X 12cm tall.

Thanks very much and feel free to toss me a little tip if you are so inclined and you find any designs of mine useful! ^_^