The box has a sliding lid for easy opening and secure storage.

Dimensions

• Outer size: 180 × 119 × 18.5 mm (L × W × H)

Fit The lid is designed with a tight fit so it stays closed well. For smoother movement after printing:

1. Slide the lid back and forth a few times to break it in

2. Lightly sand the sliding edges if needed

3. Remove small blobs/stringing from the rails before first use

Printer settings

• Material: PLA, PETG (PETG advised

• Layer height: 0.2 mm

• Walls: 3 perimeters

• Infill: 15–20%

• Print both parts flat on the bed

• Supports needed in the sliding area