#Hidden drawer for undetable mount. Suidable for tables with borders up to 72mm. See the pictures how to use. #Files ###1. HiddenDrawerCase.stl This is the first part (DrawerCase) with slide and unfold mechanics. After printing cut the build-in supports with your pliers. Mount this part under your table. Note: Don't use a cordless screwdriver, tighten by hand if using screws. ###2. HiddenDrawer.stl (3 versions with different heights) After you have mounted the mechanics under the table, you have to measure how much space you have for your drawer. (Depending on the height of your table border). Drawers are available in 50mm, 55mm and 60mm height. ###3. Nubbel.stl (optional) You can stick the nubbel under the drawer and attach a rubber band so that the drawer cannot fall out. (see picture) #Print Settings I have printed all parts with PLA in res. 0.2 I recommend infill >30% for stability. Use supports (touching buildplate only) for HiddenDrawerCase.stl ###Info: This is a reup because my account got corrupted. If this design will vanish again try alternative link: https://www.thingiverse.com/thing:5713894