This is a case for a Raspberry Zero W home automation project. It can be equipped with:

• Carbon monoxide sensor (https://it.aliexpress.com/item/1219438305.html) - round hole on the right side
• BME280 Temperature, pressure and humidity sensor (https://it.aliexpress.com/item/32849462236.html) - recess on the right side
• Raspberry camera (https://it.aliexpress.com/item/1005001953275761.html) - small round hole on the case lid
• 1.3" IPS 240x240 Display (https://it.aliexpress.com/item/32995953292.html) - large square aperture on the case lid
• Four pushbuttons (https://it.aliexpress.com/item/1005001658358642.html) - round holes on the case lid
• Power supply can be provided either through a USB cable using the slit on the left side or using the square opening at the bottom of the case, in case it is wall-mounted using wall plugs

Case and lid can be printed in PLA without supports, using 3 walls and 0.1 layer height

Creality

Ender 3

No

No

0.1

20