I moved over to klipper so i no longer have a screen on my sunlu s8. So i designed this cover to add controler fans to the case. Made with 3, 30mm x 30mm fans in mind. mine are plugged into a direct power source on the mcu so they come on when the printer does and does not chance the controller fan, the normal controller fan operates like normal. There is 2 different right side pieces for with or without a camera mount aswell as the camera mount intended for it. the camera mount has two optional heights for what ever one you want enjoy !!
feel generous ? https://cash.app/$Dmills541

here is the link for the camera its desighned for
https://www.amazon.com/Raspberry-Camera-Webcam-OV5647-Adjustment/dp/B08QFM8TVV/ref=sr_1_5?crid=BZ2PTXEVBRMC&keywords=raspberry+pi+camera&qid=1674667382&sprefix=raspberrypi+cam%2Caps%2C1391&sr=8-5

Sunlu S8

No

Yes

60%

I printed at 200c and used a draft sheild of 10mm high (setting in cura experimental section). no rafts, deffinatly supports, and you'll need 12 screws to secure the fans once its printed. id sugest adding wire to each fan to give enough slack to install and uninstall the cover as needed without pulling the wires.