Summary

Caster PLA+ or ABS

Infill 100%

temp Extruder 212 pla+

Temp Bed 60 pla+

Support Touching build plate

Overhang 55%

Support pattern lines

Support density 8.0

Support Z distance 0.2

If you need a brim with your printer

Build Plate Adhesion brim

Brim width 2.0 to 4.0

Hardware:

Bearing skate board 608 Amazon - YAMASO 20 Pcs 608 2RS Ball Bearings – Bearing Steel and Double Rubber Sealed Miniature Deep Groove Ball Bearings (8mm x 22mm x 7mm)

Bearing - pivot - Amazon - HiPicco Thrust Ball Bearings, 10pcs F8-22M Miniature Plane Axial Ball Bearing 3-in-1, 8mm x 22mm x 7mm Chrome Steel Single Direction

Wheel bolt - Amazon - uxcell 304 Stainless Steel Hex Socket Shoulder Bolt 8mm Shoulder Dia 30mm Shoulder Length M6 Thread

Joining bolt - Amazon - M8 Hex Bolts M8x30mm Hex Head Bolt Stainless Steel 304 M8-1.25 Fully Threaded Hex Tap Metric

Net 8mm - Amazon - M8 Self Clinching Nuts 304 Stainless Steel Self-Lock Nylon Inserted

Nut 6MM - Amazon - Wensilon(50pcs) M6 Self Clinching Nuts 304 Stainless Steel Self-Lock Nylon Inserted

Or get at Home Depot

Lightly grease thrust bearing

Tighten pivot bolt to where the top and botton turn freely but not loose.