My first Hueforge creation!  It is one of my favorite pictures of my mom pumping gas in the 50s.  1950's that is.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Swap Instructions:
    Start with Black
    At layer #9 (0.8mm) swap to Blue
    At layer #14 (1.2mm) swap to Turquoise
    At layer #16 (1.36mm) swap to White for the rest.

Filaments Used:
    Polymaker Panchroma Matte PLA Charcoal Black 
    Polymaker Panchroma Matte PLA Sapphire Blue 
    Polymaker Panchroma Matte PLA Pastel Ice 
    Polymaker Panchroma Matte PLA Cotton White  

The Model is 118.42x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.15997mm
 

Printed on a Creality K2 Plus with CFS