Replacement pull-tabs for the Frenchie Speed Wallet Mini. Print with TPU.

Print Settings

Tested with Generic 95A TPU and NinjaFlex on Prusa MK3S.

To print the THICK version use 0.2mm layer heights.

To print the THIN version make sure your first layer is dialed in and print at 0.1mm layer height. This one is prone to failure your printer and settings and filament have to be super tuned.

Assembly

Put a little bit of CA glue on the spine before you fold it over the strap. Then stitch using the provided hole guides. (Hopefully your hand stitching skills are better than mine)