A case I designed for the Duet 3d PanelDue 7i touchscreen. Designed for resin printing. The case shell can be printed whole, or in halves for standard (smallish) size resin printers. I printed everything but the reset button using Elegoo Tough resin. Which has enough elasticity for the bullet catch spring in the SD slot cover to function nicely. The 4 corner screw holes need to be carefully tapped for m3 helicoil inserts (1d), and the two mounting holes on the back use m5 helicoil inserts. The display is mounted using 17mm ball-socket mount hardware, (Two hole base with 48mm centers.) which provides a rock solid mount. I bought mine from amazon, but this stuff is pretty standardized, so buy where you will. I made a custom 26awg ribbon cable that is nearly twice the reccomended length for the PanelDue, in order to use the onboard micro sd socket. So far it's working perfectly.