I needed a mount for the BTT Eddy v1. Couldn't find one as BTT haven't made one for this yet.

This can be mounted where the CR touch use to be or on the H2V2s

Made one to use with heated inserts. M3 SHORT

Mounted it to the side as it won't be able to reach the back of the bed on the front of where the CR touch is located.

This will leave the mount 1.5 mm. above the nozzle head.

OFF SET: Y-18.1, X-49.9

I added a little notch to keep everything in place once screwed in.

Due to the location of the mount I'd suggest PETG.

Also added one to fit right onto the H2V2s-

Off Set for this is X-24.5 Y-34.6

This is to be used with the https://www.printables.com/model/370266-sovol-sv01pro-linear-rail-mgn9h12h-upgrade-for-h2v

But the H2V2s Mount won't need the above.

I will be using m3 screws.

Two Short 12mm m3 for the top and use the 2 long m3 screws that came with your Eddy

It was a pain to set up but this helped massively.

https://github.com/krautech/vyper-klipper/blob/main/eddy_usb-raspberrypi.md