The fan can be flipped and stached inside the main body for reduced footprint when on the move.

BOM:

• 1x 8010 5v fan

• 1x old power cable (USB A)

• 4x m2.5 5mm screws

• 4x 6x3mm magnets

• PLA

Instructions:

• Super glue all four magnets to the fan screw mounts.

• Fasten all four screws to the main body.

• Super glue the screen clip to the lip of the main body.

• Solder fan wires to a male usb if required.

If you are using type-C ensure the male or fermale module is 5v PD/QC trigger board such as: https://www.aliexpress.com/item/1005010263862796.html?spm=a2g0o.order_list.order_list_main.30.3cd11802R9SCfg .

Furthermore, the fan is already super quiet but to reduce noise even more I added a layer of electrical tape to the inside of the screen clip.