Parameterized panel connector

Overview

Stop looking for the "perfect fit" and start creating it. This oneFull parametric panel connectorsIt allows you to connect various panels at any angle or size you need—for example,Medium-density fiberboard, foam board, plywood, or acrylic board

Because this model was developed inOpenSCADIt's built in China, and you can use it."Customize"You can customize the button directly on MakerWorld. There's no need for external software.

Full customizable parameters

Customize connectors according to your specific project requirements

• Material thickness:Set an accurate groove width to achieve a tight fit
• Shaft:Adjust the number of axes in all three dimensions, so that you can create everything from edge protection to corner hubs
• Wall thickness:Control the strength and robustness of the control parts
• Tolerance:Fine-tune the gap to adapt to the printer's accuracy or material expansion
• Length:Extend the connector to increase the grip on larger panels

App

• DIY case:Make customized boxes
• Organizer:Make custom drawer dividers or shelf inserts
• And everything you can think of...

Things to note when making your own parts:

• The tolerance applies to the thickness of the grooves/plates.
• The width of the beam is 2* wall thickness + plate thickness + tolerance
• The length is a one-way length. If you create a part with two beams on an axis, the total length will be: 2* length - the width of the beams.