3d scanner turntable with tilt and speed control. The power supply and speed control may be found cheaper but these are ones I had left over from other projects. Feel free to print, sell, whatever. Need to print 4 of smaller_screw.stl (I'd use petg, 100% infill for strength). Need 2 of the mounts. The top holes in the mounts are for clamping screws if needed, so far I have not needed them. I used PLA for the prototype is and it worked so well, I'm still using it. I'm sure I will have to print it with some stronger material eventually. Also need 6-M3x12 screws.
If there are issues let me know or fix and repost. Let me know how it goes.